Enquire Now
Turbo ventilators

Wind driven Turbo ventilators are powered by the wind to create effective ventilation for different industries. Turbine or Turbo ventilators are round metal vents with fins in them. Even the slightest breeze can be enough for the turbo ventilator to rotate. Rotation causes a centrifugal force on the tip of the fins which suck out the stale hot air from inside of the building. The faster the wind, the faster the turbine will rotate and exhaust the heat, smoke, fumes, humidity, etc.


Specification
Turbine Dia 28 Inch (760mm)
Neck/Throat 24 Inch (610mm)
Height 18 Inch (460mm)
Vanes(Blades) 42 Vanes , Aluminium 0.5 mm thickness Alloy 8011
Base Ring MOC (Mounting ring) Stainless steel
Top Plate MOC Stainless Steel 0.8 mm thickness
Rotation Twin Sealed 6203ZZ bearings with self lubricating Dupont Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity Twin Sealed 6201ZZ bearings with self lubricating Dupont Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity
Centre shaft 18mm high carbon steel zinc plated.
Inner Arms M.S. with electro zinc plating
Outer Arms M.S. with electro zinc plating
Frp base plate 2 mm thick clear 1.020 mtr wide and 1.65 mtr long matching your sheet profile. Weight 8 kg(Approx)
Weight 6.5 Kg approx
Center Width 800mm ± 5 mm
Dia of Bottom Ring 600mm ± 15 mm
Nos of Bearing 02 Nos
Bearing Type SKF – 6001 ZZ & 6003 ZZ Permanently Lubricated & Sealed
Rivets Aluminium Alloy with Washer
RIDGE VENTILATOR

A ridge vent is a type of vent installed at the peak of a sloped roof which allows warm, humid air to escape a building's attic. Ridge vents are most common on shingled residential buildings.


Specification
STRENGTH Standard 29 gauge galvanized painted steel for strong, long life. All PLYCO ridge vents are G-90 Galvanized
COLORS Standard colors are: White and cocoa brown with all manufacturer colors available. (Kynar when available)
STANDARDS The MW100-35 comes standard with a 2" nailing flange which equals a 13" overall coverage to fit more building applications
EDGES Hemmed edges are standard for easier, safer handling and to guard against rust. Each vent is individually cartoned for less damage.
FLASHING Flashings are packaged with each vent for single or continuous installations which saves forgotten parts or extra cost.

About Us

The world is designed implementing various engineering skills. Big or small, it is those little bricks or steels that builds up massive buildings. Latest technologies have also established its roots in these fields and consequently are in great demand.

Contact

Plot No - V-99, At PO Wasuli,
Chakan MIDC Phase 2 , Tal Khed ,
Dist-Pune 410501 India.
Phone:
Email: info@surabhiinfraprojects.com

Subscribe Newsletter

Facebook Twitter LinkedIn Google+